Fermion: Monochrome 0.96″ 128×64 I2C/SPI OLED Display (Breakout)

1.350,00 EGP

This 0.96” OLED display module uses the SSD1306 drive chip, has 128×64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc.

This 0.96” OLED display module supports both 3.3V and 5V. The display module adopts a high-contrast, low-power OLED display. It is compatible with controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, FireBettle-M0 and so on. Internal power-on reset processing, I2C communication methods, so that your welding line will be more convenient and simpler. If you want to change I2C communication to SPI, you just need to change the resistor position. In addition, the display is in an aluminum frame package that protects the screen from damage, and also prevents you from scratching that caused by the glass edge of the screen.

Note: Turn the pixels off when you are not using the display to prevent the use of some pixels too long to darken them, which will cause the brightness uniformity problem.

Selection Guide

Product Name

Fermion: Monochrome 0.91” 128×32 I2C OLED Display with Chip Pad (Breakout)

Fermion: Monochrome 0.91” 128×32 I2C OLED Display (Breakout)

Fermion: Monochrome 0.96″ 128×64 I2C/SPI OLED Display (Breakout)

Figure

SKU

DFR0647

DFR0648

DFR0650

Chip

SSD1306

Voltage Input

3.3/5V

Resolution

128×32

128×64

Interface

I2C

I2C/SPI

Welding Method

Chip-mounting pad on the back

Ordinary welding hole

Size

41×12 mm

33×20 mm

30×30 mm

Features

1. Small size, ultra-narrow design 2. Display 2 rows of 16 pixel characters 3. Chip-mounting pad

1. Small size 2. Display 2 rows of 16 pixel characters

1. Display 4 rows of 16 pixel characters 2. Support I2C/SPI 3. Iron frame to protect the screen

Recommended

Suitable for users with certain hands-on ability to build up applications requiring space and appearance

Suitable for entry-level makers

Applicable for users who want to display much content with high-speed SPI refresh

Add to Cart

Features

Self-illuminating OLED display
Controllable pixels and low power consumption
I2C/SPI communication, I2C in default
Supports power-on reset

Applications

Thermometer
Desktop weather display
Kitchen weighing machine
Air quality detector
Mini Game consoles
Wearable display

Specification

Operating voltage: 3.3V to 5V
Color: white pixels
Number of pixels: 128 columns x 64 rows
Interface: I2C (in default) / SPI
I2C address: 0x3C
Drive chip: SSD1306
Brightness: 180 (Typ) cd/m2
Full-screen lighting power: approx. 24mA*3.3V/5V(I2C);

approx. 27mA*3.3V/5V(SPI)

Full-screen off power consumption: approx. 2mA*3.3V/5V(I2C);

approx. 2.87mA*3.3V/5V(SPI)

Operating temperature: -30°C to 70°C
Display area: 21.744 x 10.864(mm) / 0.86”x 0.42”
Size: 30.00×30.00 mm / 1.18”x 1.18”
Weight: 4.2 g

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.