Cytron MD13S DC Motor Driver 13Amp 6V-30V GROVE Compatible

1.550,00 EGP

Cytron MD13S DC Motor Driver 13Amp 6V-30V GROVE Compatible

The MD13S is a compact, user-friendly DC motor driver module that bridges small microcontrollers and medium-power brushed DC motors. The board’s layout groups connectors, status LEDs and test switches so wiring and quick checks are straightforward; this makes it convenient for bench testing and rapid prototyping.

Control is achieved via straightforward logic-level inputs that let users vary motor speed and reverse direction from common controller PWM outputs. Because the board is small and simply wired, it fits easily into hobby enclosures and educational rigs, enabling quick iteration during development and classroom demonstrations.

For everyday builds the MD13S emphasizes practical usability: easy wiring, visible status indicators, and on-board test buttons that let you manually exercise outputs without extra tools. The accompanying documentation guides through pin assignments and sample control modes, helping both newcomers and experienced builders integrate the driver into their systems reliably.

Features:

Bi-directional control for one brushed DC motor.
Support motor voltage ranges from 6V to 30V.
Maximum current up to 13A continuous (without heatsink at 25℃) and 30A
peak (10 second).
Current limiting at 30A.
3.3V and 5V logic level input.
GROVE compatible connector.
Solid state components provide faster response time and eliminate the wear
and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Speed control PWM frequency up to 20KHz (Actual output frequency is same
as input frequency).
Support both locked-antiphase and sign-magnitude PWM operation.
Support TTL PWM from microcontroller, not PWM from RC receiver.
SMD Compatible.
Dimension:61mm x 33mm.

Board Layout:

Label	Function
A	Terminal Block
B	MA LED Indicator
C	MB LED Indicator
D	MA Test Switch
E	MB Test Switch
F	Input Pin
G	Power LED Indicator
H	OC LED Indicator
I	ERR LED Indicator
J	SMD Compatible

Terminal Block: Connect to motor and power source.

Pin No.	Pin Name	Description
1	POWER +	Positive Supply (6V to 30V)
2	POWER –	Negative Supply
3	Motor Output A	Connect to motor terminal A
4	Motor Output B	Connect to motor terminal B

Input Pin: (Note that it is not for RC PWM operation)

Pin No.	Pin Name	Description
1	GND	Logic ground
2	PWM	PWM input for speed control
3	DIR	Direction control

Specifications:

Parameters	Min	Typical	Max	Unit
Power Input Voltage:	6	–	30	V
I MAX (Maximum Continuous Motor Current):	–	–	13	A
I PEAK (Peak Motor Current):	–	–	30	A
V IOH (Logic Input – High Level):	3	–	5.5	V
V IOL (Logic Input – Low Level):	0	0	0.5	V
Maximum PWM Frequency:	–	–	20	kHz

Dimension:

Applications:

High-Torque Robotic Vehicle Actuation.
Precision Control for Small Industrial Conveyors.
Automated Window and Door Mechanism Drives.
Powerful Actuation for DIY CNC and Plotter Systems.
Motorized Camera Slider and Pan-Tilt Systems.
High-Current Linear Actuator Control.
Educational Robotics and STEM Project Drives.
Automated Agricultural and Gardening Systems.
Robust Motor Control for Small Electric Scooters or Carts.
Dynamic Load Testing and Simulator Drives.

Sample connection diagram:

Package Contents:

1x MD13S 13A DC Motor Driver.
2x Terminal socket, Black for power and Green for Motor.
Grove connector with cable.

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.